American Dynamics RAS917LS-1 Manual do Operador Página 81
- Página / 130
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
AD168
Supported Protocols SensorNet
(1)
RS-422
(1) or (2)
Maximum Presets 16
(1)(2)
, 64
(1)(3)
, or 60
(4)
Maximum Patterns
(5)
3
Quick Set Menu Not supported
Address Range SensorNet: 1-180
RS-422: 1-99
(1)(6)
or
1-180
(2)(6)
Notes:
(1) Requires the appropriate code control module.
(2) Requires the AD2083-02 series code converter.
(3) Presets information is stored at the converter or control
module, not the dome.
(4) Requires AD2083-02 with firmware version 0701-11YB-
156A or newer. Preset information is stored in the
dome, not the converter.
(5) Patterns are limited by time and the number of available
dome commands. Total time for each pattern cannot
exceed 6 minutes 50 seconds. Total dome commands
used in all patterns cannot exceed 99.
(6) Requires additional equipment to achieve these
numbers. A dome address within each group of 64 or 99
cameras is reserved as a global broadcast address.
AD2050
Supported Protocol RS-422
(1)
Maximum Presets 16
(2)
or
60
(3)
Maximum Patterns
(4)
3
Quick Set Menu Not supported
Address Range 1-1024
(5)
Notes:
(1) Requires the AD2083-02 series code converter.
(2) Preset information is stored at the converter, not the
dome.
(3) Requires AD2083-02 with firmware version 0701-11YB-
156A or newer. Preset information is stored in the
dome, not the converter.
(4) Patterns are limited by time and the number of available
dome commands. Total time for each pattern cannot
exceed 6 minutes 50 seconds. Total dome commands
used in all patterns cannot exceed 99.
(5) Requires additional equipment to achieve these
numbers. A dome address within each group of 64 or 99
cameras is reserved as a global broadcast address.
MegaPower LT
Supported Protocol SensorNet
Maximum Presets 96
Maximum Patterns
(1)
3
Quick Set Menu Yes
(2)
Address Range 1-32
Notes:
(1) Patterns are limited by time and the number of available
dome commands. Total time for each pattern cannot
exceed 6 minutes 50 seconds. Total dome commands
used in all patterns cannot exceed 99.
(2) Requires a compatible keyboard.
MegaPower 48
Supported Protocols SensorNet
RS-422
Maximum Presets 96
(1)
Maximum Patterns
(2)
3
Quick Set Menu Yes
(3)
Address Range 1-48
Notes:
(1) Preset information is stored at the host, not the dome.
(2) Patterns are limited by time and the number of available
dome commands. Total time for each pattern cannot
exceed 6 minutes 50 seconds. Total dome commands
used in all patterns cannot exceed 99.
(3) Requires firmware 1.07 or newer and a compatible
keyboard.
MegaPower 1024
Supported Protocol RS-422
(1)
Maximum Presets 16
(2)
or
60
(3)
Maximum Patterns
(4)
3
Quick Set Menu Not supported
Address Range 1-1024
(5)
Notes:
(1) Requires the AD2083-02 series code converter.
(2) Preset information is stored at the converter, not the
dome.
(3) Requires AD2083-02 with firmware version 0701-11YB-
156A or newer. Preset information is stored in the
dome, not the converter.
(4) Patterns are limited by time and the number of available
dome commands. Total time for each pattern cannot
exceed 6 minutes 50 seconds. Total dome commands
used in all patterns cannot exceed 99.
(5) Requires additional equipment to achieve these
numbers. A dome address within each group of 64 or 99
cameras is reserved as a global broadcast address.
SensorNet and RS-422 Command Summary A-5
- SpeedDome Ultra VII 1
- Day/Night Camera Dome 1
- SpeedDome 3
- Ultra VII 3
- TABLE OF CONTENTS 5
- Before You Begin 7
- What’s In This Manual? 8
- Related Documents 9
- Getting Help 9
- Preface vii 9
- CHAPTER 1 11
- Blank Space 13
- Character 13
- Restoring Factory Settings 14
- Accessing the Quick Set Menu 15
- Where To Go Next 17
- Options 19
- What To Do Next 25
- Configuring Camera Features 27
- Changing the IR Mode Setting 30
- IR Mode Setting 34
- Presets and Scan Limits 37
- Setting Alarm Actions 40
- Setting Alarm Input States 42
- Setting the Home Position 43
- Setting the North Position 44
- SET NORTH POSITION 44
- PAN to new north position 44
- ZOOM to mark north position 44
- FOCUS quits w/o changing 44
- Programming Area Boundaries 45
- AREA BOUNDARIES 46
- PAN to start of BOUND 1-16 46
- PAN RIGHT ONLY 46
- ZOOM to mark BOUNDARY 46
- FOCUS saves and exits 46
- Establishing Privacy Zones 47
- NEW PRIVACY ZONE 48
- Navigate to corner 1(2, 3) 48
- ZOOM to Mark Corner 48
- FOCUS to Abandon Zone 48
- Programming Privacy Zones 49
- Zones screen 50
- Deleting All Privacy Zones 51
- Hiding Privacy Zones 51
- Setting Presets 52
- Establishing Scan Limits 53
- Scan Types 54
- Programming Scan Limits 55
- CHAPTER 5 57
- ZOOM X 92 D 58
- AUTO IRIS OFF 58
- AUTO FOCUS ON 58
- CAMERA NAME 59
- PRESET NAME/PATTERN NAME 59
- ALARM NAME 59
- AREA NAME 59
- Pointing direction 61
- (0–359°) 61
- Tilt elevation/declination 61
- Setting or Changing Names 64
- TEXT ATTRIBUTE OPTIONS 65
- CHARACTER OUTLINE ON/OFF 65
- TRANSLUCENT NAMES ON/OFF 65
- CHAPTER 6 69
- Displaying Dome Information 73
- APPENDIX A 77
- VM32/AD32 80
- AD2150/AD2350 80
- Manchester Command Summary 83
- Set Commands 85
- Call Commands 85
- APPENDIX C 87
- Pelco Command Summary 89
- Tested Pelco Equipment 90
- Supported Pelco Features 90
- Activating Auto Scan 91
- Activating Random Scan 92
- Summary 93
- Programming Presets 96
- Tested Panasonic Equipment 97
- APPENDIX E 99
- Command Summary 100
- Additional AD-UTC Commands 101
- Supported Controllers 102
- Performance Notes 102
- Vicon Command Summary 105
- IMPORTANT 108
- Programming the Scan Limits: 108
- Wiring Configurations 109
- Tested Vicon Equipment 110
- Dome Configuration Records 111
- Configuration Settings 112
- Text Attribute Options 114
- Language / Password 114
- Name Configuration 114
- Presets 115
- Dome Information 117
- Software License Agreement 119
- SPEEDDOME ULTRA VII GLOSSARY 123
- Zoom stop factors 126
- 128
Manuais e produtos relacionados com Câmaras de segurança American Dynamics RAS917LS-1
(4 páginas)Maytag MAH-3 manuals
Owner’s manuals and user’s guides for Washers Maytag MAH-3.
We providing 1 pdf manuals Maytag MAH-3 for download free by document types: User Manual
Comentários a estes Manuais