American Dynamics AD1273 Manual de Instalação descarregar pdf (Página 28)

INSTALLATION AD1273

Pendant Shroud Installation

This procedure applies only to pendant installations using the

pendant shroud. These instructions complete the pendant

mount installation procedure (refer to page 16, Pendant

Mount).

NOTE: Verify that the chassis, the lower dome, and the fascia

cover installation procedures are complete before

proceeding with the pendant shroud installation.

1) Attach the pendant shroud fascia plate to the chassis

housing with four 1/4-inch x 20 x 1-inch machine screws

(see Figure 19).

2) Loosen the hose clamp on the pendant mounting pipe and

lower the pendant shroud into place on the pendant shroud

fascia plate (see Figure 19).

NOTES: Leave the hose clamp snugly attached to the pendant

mount pipe for future servicing.

The original trim plate provided with the CobraDome

is not used with the pendant mount kit.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 55 56

Sem comentários

American Dynamics AD1273 Manual de Instalação Página 28